Reversible formation-melting of nano-crystals in supercooled oxyfluoride germanate liquids

The nanocrystals play a critical role in generating and affecting functionalities of glass materials. Therefore, scientists have made considerable efforts in clarifying microscopic mechanisms of nanocrystal formation in glass to obtain the desired type of nanocrystals. However, the phase transitions of nanocrystals during heating have not been well understood. Here we report on a discovery of the reversible melting-formation of nanocrystals in an oxyfluoride germanate glass during heating-cooling circles. Using a differential scanning calorimetry (DSC), we detected a striking endothermic event at 925 K during heating, after the glass underwent a DSC upscan to a temperature between 925–986 K and subsequent cooling. Based on Raman spectroscopy, X-ray diffraction and transmission electron microscopy, the endotherm is attributed to the melting of nano-crystal BaGeF₆ (˜20 nm). An exothermal response was observed at 890 K during the DSC downscan, implying the re-formation of BaGeF₆ nano-crystals. This suggests that the melting-formation of BaGeF₆ nano-crystals is a typical first-order transition.     

Improved magnetic and electromagnetic absorption properties of xSrFe12O19/(1−x)NiFe2O4 composites

xSrFe₁₂O₁₉/(1−x)NiFe₂O₄ composites (0 ≤ x ≤ 1.0) were synthesized by using a conventional solid-state synthetic route. The results show that magnetic hysteresis loops of the xSrFe₁₂O₁₉/(1−x)NiFe₂O₄ composites are similar to those of individual component ferrites, except for the 0.1SrFe₁₂O₁₉/0.9NiFe₂O₄ and 0.3SrFe₁₂O₁₉/0.7NiFe₂O₄, suggesting that the hard/soft magnetic phases are well exchange-coupled. The saturation magnetization, coercivity, and remanent magnetization of the xSrFe₁₂O₁₉/(1−x)NiFe₂O₄ composites are increased with increasing content of SrFe₁₂O₁₉, with maximal values of 42.1 Am² kg⁻¹, 78.7 kA m⁻¹, 17.2 Am² kg⁻¹, respectively, as the content x is about 0.5. They are higher than those of the individual components, implying that interface coupling is present in the magnetic composites. The coercivity and remanent magnetization of the composites are increased initially with increasing sintering temperature and then show a downward tendency. For the component SrFe₁₂O₁₉ and NiFe₂O₄, the minimum reflection losses are −12.5 dB and −18.3 dB at match thicknesses of 2.5 mm and 2 mm, respectively. Compared with those of the component SrFe₁₂O₁₉ and NiFe₂O₄, the microwave absorption performances of the xSrFe₁₂O₁₉/(1−x)NiFe₂O₄ composites are improved remarkably, especially for the samples of x = 0.3 and x = 0.9. The minimum reflection losses values of the 0.3SrFe₁₂O₁₉/0.7NiFe₂O₄ composite are −31.6 dB (12.7 GHz) and −20.2 dB (13 GHz), while those of the 0.9SrFe₁₂O₁₉/0.1NiFe₂O₄ composites are −23.7 dB (16.3 GHz) and −33.5 dB (15.8 GHz), as the matching thicknesses are 2.5 mm and 2 mm, respectively. Therefore, the xSrFe₁₂O₁₉/(1−x)NiFe₂O₄ composites could be used as potential microwave absorption materials.     

Controlled Secure Direct Communication Protocol via the Three-Qubit Partially Entangled Set of States

In this paper, we first re-examine the previous protocol of controlled quantum secure direct communication of Zhang et al.’s scheme, which was found insecure under two kinds of attacks, fake entangled particles attack and disentanglement attack. Then, by changing the party of the preparation of cluster states and using unitary operations, we present an improved protocol which can avoid these two kinds of attacks. Moreover, the protocol is proposed using the three-qubit partially entangled set of states. It is more efficient by only using three particles rather than four or even more to transmit one bit secret information. Given our using state is much easier to prepare for multiqubit states and our protocol needs less measurement resource, it makes this protocol more convenient from an applied point of view.     

Behavior of 316L stainless steel containing corrosion pits under cyclic loading

The environmental performance of 316L grade stainless steel, in the form of tensile specimens containing a single corrosion pit with various aspect ratios, under cyclic loading in aerated chloride solutions is investigated in this study. Results from environmental tests were compared and contrasted with those obtained using finite element analysis (FEA). Fractography of the failed specimens obtained from experiments revealed that fatigue crack initiation took place at the base of the shallow pit. The crack initiation shifted towards the shoulder and the mouth of the pit for pits of increasing depth. This process is well predicted by FEA, as the strain contour maps show that strain is the highest around the centric strip of the pit. However, for shallow pits, local strain is uniformly distributed around that strip but begins to concentrate more towards the shoulder and the mouth region for increasingly deep pits.     

Electric transport properties of rare earth doped YbxCa1-xMnO3 ceramics (part I: Optimization of ceramic processing)

A comprehensive study was performed in order to find the effect of different calcination and sintering conditions on the physical properties of calcium manganite ceramics in dependence of temperature T and partial pressure of oxygen p(O₂). The eventual formation of oxygen vacancies during sintering was investigated and the results were confirmed by monitoring the release of oxygen using a ZrO₂ oxygen sensor. The phase transition behavior was studied using thermogravimetric analysis (TGA) in a wide range of p(O₂) ≈ 10^?1 MPa down to 10^-19 MPa at high temperatures accompanied by dilatometry- and XRD-measurements. Furthermore, the present study reveals for the first time a way for reducing and preventing crack formation that may occur during sintering. The present systematic research provides essential fundamental information before performing electrical measurements necessary in order to understand important factors about charge carriers and electrical transport mechanism.     

An enhanced state estimation for linear parabolic PDE systems with mobile sensors

This paper studies an enhanced state estimation problem of distributed parameter processes modeled by a linear parabolic partial differential equation using mobile sensors. The proposed estimation scheme contains a state estimator and the guidance of mobile sensors, where the spatial domain is decomposed into multiple subdomains according to the number of sensors and each sensor is capable of moving within the respective subdomain. The state estimator is desired to make the state estimation error system exponentially stable while providing an performance bound. The mobile sensor guidance is used to enhance the transient performance of the error system. By the Lyapunov direct technique, an integrated design of state estimator and mobile sensor guidance laws is developed in the form of bilinear matrix inequalities (BMIs) to meet the desired design objectives. Moreover, to make the performance bound as small as possible, a suboptimal enhanced state estimation problem is formulated as a BMI optimization one, which can be solved via an iterative linear matrix inequality algorithm. Finally, numerical simulations are given to show the effectiveness of the proposed method.     

APP软件性能效率研究

性能效率是APP软件的重要质量属性，但目前缺乏APP软件性能效率的通用模型。分析了APP软件的性能特征，基于ISO/IEC 25010标准提出了APP软件的性能效率模型，定义了APP软件性能效率的子特性和度量指标。基于提出的APP软件性能效率模型，通过实验对APP软件的性能效率进行了度量及相关分析。     

An experimental approach towards increasing mechanical durability of extruded fish feed in the drying process

Mechanical durability of extruded fish feed must be optimized to lower economic losses as well as emission of organic matter to aquatic environments. The glass transition hypothesis for viscoelastic biopolymers is demonstrated and confirmed experimentally to be valid for extruded fish feed pellets. It is proposed and demonstrated that it is important to avoid early glass transition onset, to optimize the obtained mechanical durability. From the proposed glass transition hypothesis, immediate process relevance to the pre-drying transport mechanism is demonstrated. Furthermore, measured mechanical durability is found to range from 1.5 to 5.0% loss, for different combinations of drying parameters.     

Theoretical kinetic study of the reaction between dimethyl disulfide and OH radicals

The potential energy profile of the reaction between dimethyl disulfide and OH^? radicals is explored by utilizing ab initio and hybrid meta density functional theory methods. Having the energies and structural data of the stationary points, statistical rate theories, such as transition state theory and variable reaction coordinate-transition state theory, are employed to compute the overall rate constants, and discuss the mechanism and product channels. On the basis of the calculations, the overall rate coefficient is predicted to be 2.49?×?10^?10?cm³?molecule^?1?s^?1 at 298?K. It is found that in the most favorable pathway, the reaction proceeds via formation of the relatively unstable intermediate CH₃S^?(OH)SCH₃ decomposing rapidly to yield CH₃S^?+CH₃SOH.     

Improved Input and State Estimation for Linear Stochastic Systems with Direct Feedthrough

This paper is concerned with the problem of joint input and state estimation for linear stochastic systems with direct feedthrough. Based on the fact that each unknown input between any two time steps is always bounded, a novel improved algorithm is proposed. Compared with existing results, this algorithm can effectively enhance estimation accuracy. Moreover, the stability of the algorithm is also discussed. Finally, an illustrative example is given to demonstrate the effectiveness of the proposed approach.